功能：

    适用于帮面合缝的上胶、分叉、压平、贴加强带、加强带定长自动切断，一次性完成，效率是人工的4-5倍

特点：

1. 采用PLC控制，伺服电机驱动，自动化程度高，反应速度快，定位精度高
   
2. 胶水泵采用意大利的齿轮泵结构，精度高，出胶量有两个步进电机控制，出胶量***稳定
   
3. 加强带长度由一个伺服电机和一个步进电机控制，可确保不同材料的加强带在工作中不会产生拉伸现象，压带平整，切带长度准确
   
4. 切带长度的设定有两种功能：
   （1）前设定：以帮面的前端为基准定长度
   （2）后设定：以帮面的出端为基准定长度
   切带长度非常精准，误差不超过0.2毫米
   
5. 滚轮压力大，***压力可达到150公斤，压平效果好
   
   

Function:

    Suitable for gluing, forking, flattening, attaching reinforcing bands, and automatic cutting of reinforcing bands with fixed length for upper stitching, completed in one go, with an efficiency 4-5 times that of manual labor

Features:

1. Adopting PLC control and servo motor drive, with high degree of automation, fast reaction speed, and high positioning accuracy
   
2. The glue pump adopts an Italian gear pump structure with high accuracy. The glue output is controlled by two stepper motors, ensuring accurate and stable glue output
   
3. The length of the reinforcing strip is controlled by a servo motor and a stepper motor, which can ensure that reinforcing strips of different materials will not stretch during operation, the pressure strip is flat, and the cutting length is accurate
   
4. There are two functions for setting the cutting length:
   (1) Front setting: Set the length based on the front end of the upper surface
   (2) Post setting: Set the length based on the end of the upper surface
   The cutting length is very precise, with an error of no more than 0.2 millimeters
   
5. The roller pressure is high, and the maximum pressure can reach 150 kilograms, with good flattening effect