机器属性：

1. 裁断压力：45吨（可并双刀裁断）
   
2. 裁断效率：一秒一刀
   
3. 配置目前***口排版系统，可节省材料10%，机器速度提高2/3
   
4. 配备双刀（A、B刀模）换刀只需一秒，自动排版后可A、B刀模快速换刀、插刀组合裁断并可同时多码排版
   
5. 片料、卷料两用送料方式
   
6. 能通过互联网，将生产数据同步上传到办公室和主管手机上，便于生产管理
   
7. 可将生产指令传递到机器，让操作员了解工作内容。减少人员传递信息错误，自动排版软件可直接对接作用工厂ERP数据（留端口供使用工厂的ERP对接）。可显示故障，合格率，不合格率，以及周、月量产曲线图。实现OEE实时时效掌控
   
8. ***排版软件，机器动作提升1/3
   

读取刀模方式（四种方式任选）：

1. 直接导入刀模图形（板房直接发刀模电子档给机器，指令生产，该方式适合激光刀模）
   
2. 拍照读取刀模轮廓（适合手工打制铁刀模）
   
3. 读图机扫刀模轮廓（适合手工打制铁刀模）
   
4. 刀模直接做准中心孔位，不需任何导入，排版安装即可使用
   

Machine Properties:

1. Cutting pressure: 45 tons (capable of parallel double cutting)
   
2. Cutting efficiency: one knife per second
   
3. The configuration is currently the first imported typesetting system, which can save 10% of materials and increase machine speed by 2/3
   
4. Equipped with dual knife (A, B knife molds) for tool change, it only takes one second. After automatic typesetting, the A and B knife molds can be quickly changed, and the combination of inserting knives can be cut, and multiple code typesetting can be performed simultaneously
   
5. Dual purpose feeding method for sheet and roll materials
   
6. Ability to synchronously upload production data to the office and supervisor's mobile phone through the internet, facilitating production management
   
7. Production instructions can be transmitted to the machine, allowing operators to understand the work content. Reduce personnel error in transmitting information, and the automatic typesetting software can directly interface with the factory's ERP data (leaving ports for the factory's ERP connection). It can display faults, pass rates, fail rates, and weekly and monthly mass production curves. Realize real-time and timely control of OEE
   
8. Latest typesetting software, increasing machine action by 1/3
   

Reading tool mold mode (four options available):

1. Directly import knife mold graphics (the board room directly sends electronic files of the knife mold to the machine, instructing production, which is suitable for laser knife molds)
   
2. Take a photo to read the contour of the knife mold (suitable for manually making iron knife molds)
   
3. Outline of the scanner blade mold (suitable for manually making iron blade molds)
   
4. The knife mold can be directly aligned with the center hole position without any import, and can be used for layout and installation